模具常用英语大全 
than 多于：more than DFM常用句型 关于产品壁厚分析的句型(Part Wall thickness)： 1．此处壁过厚，易产生缩水，建议减少壁厚。
11170 1
汽车零部件模具与注塑 4年前
热界面材料（TIM）近期热文速览 
It can keep mechanical stability after 10,000 cycles at a compressive strain of 60% and sustain high temperature up to 500 °C, which has never been realized in previous reports.
2320
热管理博览会 2年前
abaqus分析热轧椭圆空心型钢的抗压强度（一） 
These elements have been shown to perform well in similar applications [10–12].
2688
abaquser 1年前
沃尔沃XC90空气动力学CFD网格划分 
The first prismatic layer has a height of 1.5 mm and an edge length of approximately 10 mm, which gives a y+ value of less than 100 for a velocity of 38.88 m/s.
2694 2 2
网格大师 2年前
[AQWA小技巧]AQWA的报错信息及解决方案
THE SIZE OF MORE THAN 5% OF THE ELEMENTS ARE GREATER THAN 1/7OF THE WAVELENGTH.
6617 1
海工 4年前
KISSsoft软件计算结果翻译 
/ 9.504Chordal height from da.m 弧齿高(mm) [ha] 7.048 6.476Tooth thickness (Arc) 齿厚(mm) [sn] 10.006 9.760
4895 13 3
—扶我起来— 4年前
手把手教你用Gromacs完成溶菌酶在水中的动力学模拟 
) has 1314 elementsGroup 9 ( SideChain-H) has 484 elementsGroup 10 ( Prot-Masses) has 1960 elementsGroup 11 ( non-Protein) has 31932 elementsGroup 12 ( Water) has 31932 elementsGroup
3197 1 1
深圳北鲲云计算有限公司 3年前
美论坛：美国能在芯片上卡中国脖子多久？荷兰芯片工程师给出答案 
运输需要41辆半卡车，耗资1.5亿美元，有10万个主要部件，镜子需要数月的打磨才能达到所需的光滑程度，需要多名拥有博士学位的人作为机器操作员。很高科技。不是吗?EUV光刻机Unfortunately, ASML is a very convenient target for the USA.
2239
机械发明爱好者 3年前
GTN 模型参考vumat 
Then we have coalescence, and Void should be less than f_f IF (Void .ge. 0.99*f_f) THEN Void = 0.99*f_f END IF ELSE IF (Void .ge. 0.99*(1.0/BETA1
2596 2 1
晶体塑性有限元 1年前
百家争鸣：CAE前处理之网格划分评价指标控制要求 
在ANSYS中的四面体推荐使用10节点高阶的Solid187单元，该单元具有一下特点： 1）产生网格容易； 2）对模型的适应性强； 3）基于四面体单元可以进行自适应网格加密。 如图1给出了四面体187单元的示意图，该单元为ANSYS单元库中的10节点高阶四面体单元，也是ANSYS Workbench环境中对复杂模型优先使用的单元。
3390 2
安世亚太 4年前
EV design – electric motors 
The continuous torque is delivered starting from 840 Nm and for speeds above 2000 rpm is only 5% less than peak torque.
2677 2 1
feng-A 4年前
EV design – electric motors 
The continuous torque is delivered starting from 840 Nm and for speeds above 2000 rpm is only 5% less than peak torque.
3137 3 1
EDC电驱未来 4年前
Lsdyna出现“Initialization completed”后就没有了，没有error没有termination
length less than or equal to 0.0 LENL = 0.0000E+00; LENM = 0.0000E+00; expanding memory to 848367621 d 117909878 expanding memory to 867695295 d 117909882 expanding
2700 2
明月照我程 2年前
文献速览第4期-隔热保温气凝胶材料 
Impressively, the rGO-CNT-VG/epoxy composites possess excellent thermal conductivity of 2.46 W/mK and EMI shielding effectiveness of 56.65 dB, which are 5.1 times and 1.9 times higher than those of the
4282
热管理博览会 2年前
开源Johnson-Cook损伤vumat子程序 
SV9: status of the element. If 1, the element is active, otherwise, the! element was deleted.! SV10 to SV16: stress tensor in the previous step.!!
2195
晶体塑性有限元 22天前
ansys workbench mechanical 所有命令 
Failure is experienced when you have a Safety
Factor less than 1.
4876 4 3
yyddss 12月前
卡车双叉臂前悬+转向梯形机构，仿真报错，如何解决？
Static Solution converged in 1 iterationsResidual imbalance is less than 5.91973E-08End Static Solutioncommand: simulate/static, end=101.000000, steps=100Begin Simulation****** Performing
3041
用户_143356 5月前
abaqus分析热轧椭圆空心型钢的抗压强度（二） 
This will ensure that the entire shell thickness is extruded inside the outer tube diameter. 3.
2707
abaquser 1年前
Moldex3D模流分析之Plastik HT成功利用Moldex3D将产品变形降至最低 
The results showed the temperature difference was reduced to less than 15°C on the tool surface (Fig.7a,7b) and the temperature range on the part become more uniform(Fig.8).
2197
Moldex3D 中国 2年前
20条/页 
跳至页
技术邻APP
工程师必备
工程师必备
- 项目客服
- 培训客服
- 平台客服
TOP
